 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Micrel, Inc. REGISTERED HEX TTL-TO-PECL DESCRIPTION SY10H606 SY100H606 SY10H606 SY100H606 FEATURES s s s s s s s s Differential 50 ECL outputs Choice between differential PECL or TTL clock input Single +5V power supply VBB output for single-ended use Multiple power and ground pins to minimize noise Specified within-device skew Fully compatible with MC10H/100H606 Available in 28-pin PLCC package The SY10/100H606 are 6-bit, registered, single supply TTL-to-PECL translators. The devices feature differential PECL outputs as well as a choice between either a differential PECL clock input or a TTL clock input. The asynchronous master reset control is a PECL level input. With its differential ECL outputs and TTL inputs, the H606 device is ideally suited for the transmit function of a HPPI bus-type board-to-board interface application. The on-chip registers simplify the task of synchronizing the data between the two boards. The device is available in either ECL standard: the 10H device is compatible with 10K logic levels, while the 100H device is compatible with 100K logic levels. BLOCK DIAGRAM PIN NAMES Pin D0 - D5 Function TTL Data Inputs Differential PECL Clock Inputs TTL Clock Input PECL Master Reset Input True PECL Outputs Inverted PECL Outputs PECL VCC (5.0V) TTL VCC (5.0V) TTL/PECL Ground VBB Reference Output (PECL) 1 OF 6 BITS Dn D Q Qn Qn CLK, CLK TCLK MR Q0 - Q5 Q0 - Q5 CLK R VCCE VCCT GND VBB CLK CLK TCLK MR VBB M9999-032906 hbwhelp@micrel.com or (408) 955-1690 1 Rev.: E Amendment: /0 Issue Date: March 2006 Micrel, Inc. SY10H606 SY100H606 PACKAGE/ORDERING INFORMATION D2 VCCT D3 VCCE Ordering Information(1) Part Number Package Type J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 J28-1 Operating Range Commercial Commercial Commercial Commercial Commercial Commercial Commercial Commercial Package Marking SY10H606JC SY10H606JC SY100H606JC SY100H606JC Lead Finish Sn-Pb Sn-Pb Sn-Pb Sn-Pb 25 24 23 22 21 20 19 D1 D4 D5 D0 TCLK VBB CLK CLK MR VCCE 26 27 28 1 2 3 4 5 6 7 8 9 10 11 18 17 16 Q5 Q5 Q4 Q4 VCCE Q3 Q3 SY10H606JC SY10H606JCTR(2) SY100H606JC SY100H606JCTR(2) SY10H606JZ(3) SY10H606JZTR(2, 3) SY100H606JZ(3) SY100H606JZTR(2, 3) Notes: TOP VIEW PLCC 15 14 13 12 SY10H606JZ with Matte-Sn Pb-Free bar-line indicator SY10H606JZ with Matte-Sn Pb-Free bar-line indicator SY100H606JZ with Matte-Sn Pb-Free bar-line indicator SY100H606JZ with Matte-Sn Pb-Free bar-line indicator Q0 Q0 GND Q1 Q1 28-Pin PLCC (J28-1) Q2 Q2 1. Contact factory for die availability. Dice are guaranteed at TA = 25C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-032906 hbwhelp@micrel.com or (408) 955-1690 2 Micrel, Inc. SY10H606 SY100H606 TRUTH TABLE Dn L H X MR L L H TCLK/CLK Z Z X Qn + 1 L H L Z = Low to High Transition. DC ELECTRICAL CHARACTERISTICS VCCT = VCCE = 5.0V 5% TA= 0C Symbol ICCTL ICCTH IGND Parameter Supply Current Supply Current Supply Current Min. -- -- -- Typ. 18 13 75 Max. 30 25 90 -- -- -- TA= +25C Min. Typ. 18 13 75 Max. 30 25 90 -- -- -- TA= + 85C Min. Typ. 18 13 75 Max. 30 25 95 Unit mA mA mA Condition Outputs LOW Outputs HIGH TTL DC ELECTRICAL CHARACTERISTICS VCCT = VCCE = 5.0V 5% TA= 0C Symbol VIH VIL VIK IIH IIL Parameter Input HIGH Voltage Input LOW Voltage Input Clamp Voltage Input HIGH Current Input LOW Current Min. 2.0 -- -- -- -- -- Max. -- 0.8 -1.2 20 100 -0.6 TA= +25C Min. 2.0 -- -- -- -- -- Max. -- 0.8 -1.2 20 100 -0.6 TA= + 85C Min. 2.0 -- -- -- -- -- Max. -- 0.8 -1.2 20 100 -0.6 Unit V V V A mA IIN = -18mA VIN = 2.7V VIN = 7.0V VIN = 0.5V Condition 10H PECL DC ELECTRICAL CHARACTERISTICS(1) VCCT = VCCE = 5.0V 5% TA= 0C Symbol IIH IIL VIH VIL VOH VOL VBB Parameter Input HIGH Current Input LOW Current Input HIGH Voltage Input LOW Voltage Output HIGH Voltage Output LOW Voltage Output Bias Voltage Min. -- 0.5 3830 3050 3980 3050 3620 Max. 225 -- 4160 3520 4160 3370 3730 TA= +25C Min. -- 0.5 3870 3050 4020 3050 3650 Max. 145 -- 4190 3520 4190 3370 3750 TA= + 85C Min. -- 0.5 3930 3050 4080 3050 3690 Max. 145 -- 4280 3555 4270 3400 3810 Unit A A mV mV mV mV mV VCCT = 5.0V VCCT = 5.0V VCCT = 5.0V VCCT = 5.0V VCCT = 5.0V Condition Note: 1. PECL VIL, VIH, VOL, VOH, VBB are given for VCCT = VCCE = 5.0V and will vary 1:1 with power supply. M9999-032906 hbwhelp@micrel.com or (408) 955-1690 3 Micrel, Inc. SY10H606 SY100H606 100H PECL DC ELECTRICAL CHARACTERISTICS(1) VCCT = VEEC = 5.0V 5% TA= 0C Symbol IIH IIL VIH VIL VOH VOL VBB Parameter Input HIGH Current Input LOW Current Input HIGH Voltage Input LOW Voltage Output HIGH Voltage Output LOW Voltage Output Bias Voltage Min. -- 0.5 3835 3190 3975 3190 3620 Max. 225 -- 4120 3525 4120 3380 3740 TA= +25C Min. -- 0.5 3835 3190 3975 3190 3620 Max. 145 -- 4120 3525 4120 3380 3740 TA= + 85C Min. -- 0.5 3835 3190 3975 3190 3620 Max. 145 -- 4120 3525 4120 3380 3740 Unit A A mV mV mV mV mV VCCT = 5.0V VCCT = 5.0V VCCT = 5.0V VCCT = 5.0V VCCT = 5.0V Condition Note: 1. PECL VIL, VIH, VOL, VOH, VBB are given for VCCT = VCCE = 5.0V and will vary 1:1 with power supply. AC ELECTRICAL CHARACTERISTICS VCCT = VCCE = 5.0V 5% TA= 0C Symbol tPD tPD tPD tPD tPD tS tH tPW tPW tr tf tRES/REC Parameter Propagation Delay TCLK+ + Propagation Delay TCLK+ - Propagation Delay CLK+ + Propagation Delay CLK+ - Propagation Delay MR+ - Set-up Time Hold Time1.5 Minimum Pulse Width CLK Minimum Pulse Width MR Rise/Fall Time Reset/Recovery Time Min. Typ. 0.800 0.800 0.800 0.800 0.800 1.5 0.5 1.5 1.5 -- 2.5 -- -- -- -- -- 0.5 -- -- -- -- 2.0 Max. TA= +25C Min. Typ. -- -- -- -- -- 0.5 -- 1.0 -- 1.0 2.0 Max. TA= + 85C Min. Typ. -- -- -- -- -- 0.5 -- -- -- -- 2.0 Max. 2.800 2.800 2.800 2.800 2.800 -- ns -- -- 2.0 -- ns ns ns ns Unit ns ns ns ns ns ns Condition 2.800 0.800 2.800 0.800 2.800 0.800 2.800 0.800 2.800 0.800 -- 1.5 -- -- 2.0 -- 1.5 0.5 1.5 1.5 -- 2.5 2.800 0.800 2.800 0.800 2.800 0.800 2.800 0.800 2.800 0.800 -- 1.5 -- -- 2.0 -- 1.5 0.5 1.5 1.5 -- 2.5 M9999-032906 hbwhelp@micrel.com or (408) 955-1690 4 Micrel, Inc. SY10H606 SY100H606 28-PIN PLCC (J28-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL USA + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. (c) 2006 Micrel, Incorporated. M9999-032906 hbwhelp@micrel.com or (408) 955-1690 5 |
Price & Availability of SY100H606JC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |